IPC-A-610 CIT Certified IPC Trainer Training

IPC-A-610 Acceptability of Electronic Assemblies. IPC-A-610 is the most widely used industry consensus electronics assembly Training in the world defining Accept and Defect criteria. A must for all quality assurance and assembly departments, IPC-A-610 Training illustrates industry-accepted criteria for electronics assemblies using theory information, photographs and illustrations. Topics include flex attachment, board in board, part on part, lead free, component orientation and soldering criteria for through-hole, Surface Mount, mechanical assembly, cleaning, marking, coating, and laminate requirements. IPC-A-610 Training is invaluable for all inspectors, operators and trainers.

Click here for further information on this training course.

J-STD-001 CIS Certified IPC Specialist Training

IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria on soldering processes and materials. Updated with participants from 18 countries providing input and expertise, this theory and practical training brings the latest criteria along with new information to ease its use and comprehension. This is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for electrical and electronic assemblies.

Click here for further information on this training course.

IPC-A-600 CIT/CIS Certified Training

IPC-A-600 is the definitive Training for printed board acceptability. IPC-A-600 Training incorporates photographs and illustrations of the target, acceptable and nonconforming conditions that are either internally or externally observable on bare printed boards. The training synchronizes criteria to the acceptability requirements expressed in IPC-6012 and IPC-6013.

Click here for further information about this course.

J-STD-001 CIT Certified IPC Trainer Training

IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria on soldering processes and materials. Updated with participants from 18 countries providing input and expertise, this theory and practical training brings the latest criteria along with new information to ease its use and comprehension. This is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for electrical and electronic assemblies.

Click here for further information on this training course.

IPC-CID Certified Interconnect Design

IPC CID is a professional development program providing training in objective evaluation of core competencies in PCB design, based upon industry standards rather than specifications of just one company. Courses enhance and assess technical knowledge: how to transform an electrical circuit description into a PCB design that can be manufactured, assembled and tested.

IPC CID  is a valuable professional credential recognized throughout the electronics industry. This technical training holds the most benefit for PCB designers with at least 2 years of hands-on experience. Because Designer Certification builds a foundation in design decision-making and practical application of IPC standards, the program is open to all engineering staff and managers with interest in design: Sales, Purchasing, R&D, Quality, Test.

Click here for further information on the training course.

IPC-A-610 CIT Re-Certification Certified IPC Trainer Training

IPC-A-610 Acceptability of Electronic Assemblies. IPC-A-610 is the most widely used industry consensus electronics assembly Training in the world defining Accept and Defect criteria. A must for all quality assurance and assembly departments, IPC-A-610 Training illustrates industry-accepted criteria for electronics assemblies using theory information, photographs and illustrations. Topics include flex attachment, board in board, part on part, lead free, component orientation and soldering criteria for through-hole, Surface Mount, mechanical assembly, cleaning, marking, coating, and laminate requirements. IPC-A-610 Training is invaluable for all inspectors, operators and trainers.

Click here for further information on the training course.

J-STD-001 CIT Re-Certification Certified IPC Trainer Training

IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria on soldering processes and materials. Updated with participants from 18 countries providing input and expertise, this theory and practical training brings the latest criteria along with new information to ease its use and comprehension. This is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for electrical and electronic assemblies.

Click here for further information on this training course.

IPC CID+ Enhanced Certified Interconnect Design Training

IPC CID+ is a professional development program providing training in objective evaluation of core competencies in PCB design, based upon industry standards rather than specifications of just one company. Courses enhance and assess technical knowledge: how to transform an electrical circuit description into a PCB design that can be manufactured, assembled and tested.

IPC CID+ (Advanced) is a valuable professional credential recognized throughout the electronics industry. This technical training holds the most benefit for PCB designers with at least 2 years of hands-on experience. Because Designer Certification builds a foundation in design decision-making and practical application of IPC standards, the program is open to all engineering staff and managers with interest in design: Sales, Purchasing, R&D, Quality, Test.

Click here for further information on the training course.